<div id="topdetails"><img src="images/stories/er1100-prod-detail2.jpg" border="0" />
<h1>ER 1100 (sample 2)</h1>
<h2>SPECIFICATION</h2>
<table border="0" cellspacing="0" cellpadding="0">
<tbody>
<tr>
<td>ANSI/AWS</td>
<td>A5.10 (ER &amp; R)</td>
<td>ASTM B316</td>
</tr>
<tr>
<td>QQ-A-430</td>
<td>AMS 4180</td>
<td> </td>
</tr>
</tbody>
</table>
</div>
<div id="botdetails">
<h2>DESCRIPTION/APPLICATION</h2>
<p><strong>Alloy 1100 </strong>is highly resistant to chemical attack and weathering.It is a relatively soft alloy that is very formable and is used most extensively in thin gauge and foil products.It has very good welding characteristics and is also used as a filler alloy for welding purposes.A desirable characteristic of this alloy is the bright finish which is obtained by anodizing.</p>
<ul>
<li>Non-Heat Treatable</li>
<li>ISO Designation: A199.0Cu</li>
<li>Principle alloying elements:Copper</li>
</ul>
<h2>TYPICAL CHEMICAL ANALYSIS OF ER 1100</h2>
<table border="1" cellspacing="6" cellpadding="0" width="95%">
<tbody>
<tr>
<td>Si</td>
<td>Fe</td>
<td>Cu</td>
<td>Mn</td>
<td>Mg</td>
<td>Cr</td>
<td>Zn</td>
<td>Ti</td>
<td>EACH</td>
<td>TOTAL</td>
<td>Al (min)</td>
</tr>
<tr>
<td>*</td>
<td>*</td>
<td>0.05-0.20</td>
<td>0.05</td>
<td>-</td>
<td>-</td>
<td>0.10</td>
<td>-</td>
<td>0.05</td>
<td>0.15</td>
<td>99.0</td>
</tr>
</tbody>
</table>
<p><em><strong>* Silicon + Iron 0.95 </strong></em></p>
<h2>TYPICAL MECHANICAL PROPERTIES</h2>
<table border="0" cellspacing="0" cellpadding="0" width="80%">
<tbody>
<tr>
<td width="50%">Melting Range:</td>
<td>1190-1215° F</td>
</tr>
<tr>
<td width="50%">Density:</td>
<td>0.098 lbs./cu.in</td>
</tr>
<tr>
<td width="50%">Resistance to corrosion:</td>
<td>A (Gen) A(SCC)</td>
</tr>
<tr>
<td width="50%">Conductivity:</td>
<td>59% IACS (-H12)</td>
</tr>
<tr>
<td width="50%">Anodize Color:</td>
<td>Light Golden</td>
</tr>
<tr>
<td width="50%">Workability rating:</td>
<td>A(-H14)</td>
</tr>
</tbody>
</table>
</div>